Order Products : sales@su-jiao.com

NuSil MED1-6300

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	K810Fv_NuSil-MED1-6300.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Comments: HIGH PURITY, HIGH PENETRATION, SOFT COHESIVE GEL

Message

NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).

A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices.

Comments: HIGH PURITY, HIGH PENETRATION, SOFT COHESIVE GEL

General Information
Features	Biocompatible Breathable High Purity Low Viscosity Soft
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Forms	Gel
Processing Method	Encapsulating

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Penetration Depth ¹	5.00	mm

Uncured Properties	Nominal Value	Unit
Density	0.978	g/cm³
Viscosity	1.0	Pa·s
Curing Time (140°C)	5.0	hr

Note Message
1 .	Shaft weight/foot diameter/time : 12g/25.4mm/15s

Resin Grade	Manufacturer	Category	Trademark
Unipren® Elastomers B3 PRTA010 55A UP314	Petropol Industry and Trade of Polymers LTDA	TPV	Unipren® Elastomers
VAMPEEK A 1510	Vamp Tech	PEEK	VAMPEEK
ATTANE™ 4404G	The Dow Chemical Company	ULDPE	ATTANE™
Generic Phenolic - Graphite Powder	Generic	Phenolic	Generic
HANWHA LDPE 5312P	Hanwha Chemical	LDPE	HANWHA LDPE