Order Products : sales@su-jiao.com
VENELENE® 2908APUV
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Poliolefinas Internacionales, C.A. (Polinter) |
| Trademark: | VENELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | K6STD2_VENELENE-2908APUV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features:
Applications:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 11 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | 2.00 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 27.0 | MPa | |
| Break | 23.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 18 | % | |
| Break | > 1200 | % | |
| Flexural Modulus | 1000 | MPa | ASTM D790 |
| Flexural Strength (5.0% Strain) | 26.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact | 90.0 | J/cm | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 129 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 to 220 | °C | |
| Mold Temperature | < 20.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® AY24BK6722 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| Anjacom® 055/80-GK20 | Almaak International GmbH | PC+ABS | Anjacom® |
| LUVOCOM® 1850/GF/30/TF/13/SI/2 | Lehmann & Voss & Co. | PBT | LUVOCOM® |
| Pibiter® NRV20 NAT001 | SO.F.TER. SPA | PBT | Pibiter® |
| Sylvin 3299-55 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
