Order Products : sales@su-jiao.com
NYCOA Polyamide 571 HS
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | K6SO9N_NYCOA-Polyamide-571-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 571 HS is a medium viscosity Nylon 6 resin developed specifically for Rotational Molding. NYCOA 571 HS possesses an excellent combination of impact strength and rigidity, as well as excellent thermal properties and chemical resistance. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (235°C/1.0 kg) | 2.6 | g/10 min | ASTM D1238 |
| Water Absorption (24 hr) | 1.6 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 66.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 150 | % | ASTM D638 |
| Flexural Modulus 3 | 2070 | MPa | ASTM D790 |
| Flexural Strength 4 | 89.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 170 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 220 | °C | DSC |
| Additional Information |
|---|
| The value listed as Melting Point DSC, was tested in accordance with ASTM D789.Relative Viscosity, NYCOA method: 3.0 to 3.4 SAVWater Extracable, NYCOA method: 1.5%Melt Mass- Flow Rate (MFR), ASTM D1238, 235°C/1 kg: 2.4 to 2.8 g/10min |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ NM-718.G002-1704 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| Badalac® ABS 20 GF15 | Bada AG | ABS | Badalac® |
| ARMAMID® PA NE 30-2T | Poly Plastic | Nylon 6 | ARMAMID® |
| FRAGOM PR/721 | Crosspolimeri S.p.A. | Polyolefin, Unspecified | FRAGOM |
| Plenco 08112 (Compression) | Plastics Engineering Co. | Polyester, TS | Plenco |
