Order Products : sales@su-jiao.com
BMC 2270
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Bulk Molding Compounds, Inc. |
| Trademark: | BMC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | K4HN5A_BMC-2270.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BMC 2270 molding compound is a mineral filled, glass-fiber-reinforced polyester compound suitable for compression and transfer molding. It is a general purpose material with medium impact strength and wet insulation resistance. Typical applications include distributor caps and rotors. BMC 2270 molding compound is produced in extruded form in a range on industrial colors. It is available in logs up to 12 inches in length or as precut slugs, of specific weight, in diameters from 1" to 2 ½". Within this range, smaller diameters are supplied as multiple extrusions and weight tolerances are plus or minus 5% up to a maximum of plus or minus 15 grams. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.86 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (Compression Molded) | 0.25 to 0.35 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.12 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Barcol Hardness | 30 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 41.4 | MPa | ASTM D638 |
| Flexural Strength (Compression Molded) | 121 | MPa | ASTM D790 |
| Compressive Strength | 162 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 190 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | 260 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 15 | kV/mm | ASTM D149 |
| Dielectric Constant (60 Hz) | 5.30 | ASTM D150 | |
| Dissipation Factor (60 Hz) | 0.018 | ASTM D150 | |
| Arc Resistance | 190 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) | 500 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | V-0 | ||
| 3.18 mm | V-0 | ||
| 6.35 mm | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 138 to 166 | °C |
| Note Message | |
|---|---|
| 1 . | Method A (Short-Time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ryton® R-4-240NA | Solvay Specialty Polymers | PPS | Ryton® |
| Fiberfil® PP-61/VO | Fiberfil® Engineered Plastics Inc. | PP Copolymer | Fiberfil® |
| LITEN PL 10 | UNIPETROL RPA | PE Copolymer | LITEN |
| Plaslube® PPSU GF30 TL10 LE | Techmer Engineered Solutions | PPSU | Plaslube® |
| Daelim Po1y® LH3750M | DAELIM INDUSTRIAL CO., LTD. | mMDPE | Daelim Po1y® |
