Order Products : sales@su-jiao.com
Thermoset Plastics EL-636
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Izc4dg_Thermoset-Plastics-EL-636.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Thermoset Plastics EL-636 is an Epoxy; Epoxide (Epoxy) material. It is available in North America for casting. Primary attribute of Thermoset Plastics EL-636: Heat Resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 1.61 | g/cm³ | ASTM D1895 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 96 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 42.7 | MPa | ASTM D638 |
| Flexural Strength (Yield) | 85.8 | MPa | ASTM D790 |
| Compressive Strength | 236 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 1.0 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity (25°C) | 60000 | cP | ASTM D2393 |
| Demold Time | |||
| 50°C | 720 to 960 | min | |
| 93°C | 120 | min | |
| 149°C | 120 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXT REGRIND PBT 420-400RG | NEXT Specialty Resins, Inc. | PBT | NEXT REGRIND |
| ALTECH® PA6 A 2030/109 GF30 BK1132-07LS | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| APICAL 500AV | Kaneka Corporation | PI, TS | APICAL |
| Karina GRAY PVC COMPOUND 800-18/423-A-ERYB | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Karina PVC COMPOUND GRAY E-700N18/724-E-IS | Karina Ind. e Com. de Plásticos Ltda | PVC, Flexible | Karina |
