Order Products : sales@su-jiao.com
Trademark PE LLD2025
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Trademark Plastics Corporation |
| Trademark: | Trademark PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IxiGRF_Trademark-PE-LLD2025.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Trademark PE LLD2025 is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in North America. Applications of Trademark PE LLD2025 include caps/lids/closures, additive/masterbatch, food contact applications and household applications. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant (Injection Molded) | 259 | MPa | ASTM D638 |
| Tensile Strength (Yield, Injection Molded) | 11.1 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 360 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.1 | °C | ASTM D746 |
| Vicat Softening Temperature | 95.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nanjing Hongrui PC CS1000 | Nanjing Hongrui Engineering Plastics Co., Ltd. | PC | Nanjing Hongrui PC |
| Chemical Resources PA612158S | Chemical Resources, Inc. | Nylon 612 | Chemical Resources |
| Hanwha Total PP BB110 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP Impact Copolymer | Hanwha Total PP |
| LNP™ COLORCOMP™ D1000 compound | SABIC Innovative Plastics Europe | PC | LNP™ COLORCOMP™ |
| Polifor® 10 TE/30 NATURALE | SO.F.TER. SPA | PP Homopolymer | Polifor® |
