Order Products : sales@su-jiao.com
Optix® CA-924 FDA
| Category: | Acrylic (PMMA) , Polymethyl Methacrylate Acrylic |
| Manufacturer: | Plaskolite, Inc. |
| Trademark: | Optix® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IpGE43_OptixCA924FDA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Optix®CA-924 FDA is a polymethyl methacrylate-acrylic material,. This product is available in North America or Europe,. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) | 6.3 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 - 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3250 | MPa | ASTM D638 |
| Tensile Strength | 58.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 4.6 | % | ASTM D638 |
| Flexural Strength | 86.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 32 | J/m | ASTM D256 |
| Dart Drop Impact 1(3.18 mm) | 1.58 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 83.3 | °C | ASTM D648 |
| Vicat Softening Temperature | 112 | °C | ASTM D1525 |
| CLTE - Flow (-30 to 30°C) | 7.0E-5 | cm/cm/°C | ASTM D696 |
| Note Message | |
|---|---|
| 1 . | Geometry GB |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SMOKEGUARD™ III 1057 NATURAL | AlphaGary | PVC, Semi-Rigid | SMOKEGUARD™ III |
| Ultralloy™ 3312 | Hapco Inc. | TP, Unspecified | Ultralloy™ |
| AFFINITY™ PT 1451G1 | The Dow Chemical Company | POP | AFFINITY™ |
| Advanced Composites ADX-5007 | Advanced Composites, Inc. | TPO | Advanced Composites |
| Plasti-Paste® II | Smooth-On, Inc | PUR, Unspecified | Plasti-Paste® |
