Order Products : sales@su-jiao.com
FRAGOM PR/410 S4
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IleOMS_FRAGOM-PR-410-S4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM PR PR/410 S4 is a flame retardant halogen free polyolefinic thermoplastic compounds. FRAGOM PR PR/410 S4 is a flame-retardant polyolefinic thermoplastic compound having high temperature index and good oxygen index, suitable for cable sheathing and insulation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.51 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 160°C/21.6 kg | 14 | g/10 min | |
| 190°C/21.6 kg | 40 | g/10 min | |
| Water Absorption 1(100°C) | < 35.0 | g/m² | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test - Penetration 2(90°C) | 25 | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Corrosive Gas in Smoke - pH | > 4.50 | IEC 60754-2 | |
| Halogen Content | 0 | % | IEC 60754-1 |
| Temperature Index (Burning) 3 | 280 | °C | NES 715 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 12.5 | MPa | IEC 60811 |
| Tensile Strain (Break) | > 150 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (110°C, 168 hr) | 6.0 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (110°C, 168 hr) | -4.0 | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 34 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 90.0 | °C | |
| Cylinder Zone 2 Temp. | 125 | °C | |
| Cylinder Zone 3 Temp. | 150 | °C | |
| Cylinder Zone 4 Temp. | 160 | °C | |
| Cylinder Zone 5 Temp. | 165 | °C | |
| Die Temperature | 170 | °C |
| Note Message | |
|---|---|
| 1 . | 24 hr |
| 2 . | K=0.7, 6 hr |
| 3 . | 21% O2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 66 GF 50 H | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| IROGRAN® A 85 P 4854 | Huntsman Corporation | TPU-Polyether | IROGRAN® |
| PERCOM® MCS12U | A. Schulman Europe | PP Copolymer | PERCOM® |
| Capilene® CE 71 E | Carmel Olefins Ltd. | PP Random Copolymer | Capilene® |
| Starex PT-0170 M | LOTTE ADVANCED MATERIALS CO., LTD. | ABS | Starex |
