Order Products : sales@su-jiao.com

Sinpolene MBW1282

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Teknor Apex Asia Pacific PTE. LTD.
Trademark:	Sinpolene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Ikla40_Sinpolene-MBW1282.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Sinpolene MBW1282 is a polyethylene-based pure white masterbatch designed specifically for use in tubular film blowing, cast film, blow moulding and extrusion of polyolefins, where processing temperatures exceed 250C. With its high pigment loading, Sinpolene MBW1282 offers high colouring value with excellent quality and performance. The blue undertone of this masterbatch is attributed by specially selected high performance, fine crystal size rutile titanium dioxide. Sinpolene MBW1282 is delivered as free flowing pellets for processing convenience. CHARACTERISTICS * Easy processing * Good dispersion * High opacifying power * Excellent whiteness * Low die deposit

Message

Sinpolene MBW1282 is a polyethylene-based pure white masterbatch designed specifically for use in tubular film blowing, cast film, blow moulding and extrusion of polyolefins, where processing temperatures exceed 250C. With its high pigment loading, Sinpolene MBW1282 offers high colouring value with excellent quality and performance.

The blue undertone of this masterbatch is attributed by specially selected high performance, fine crystal size rutile titanium dioxide.

Sinpolene MBW1282 is delivered as free flowing pellets for processing convenience.
CHARACTERISTICS
* Easy processing
* Good dispersion
* High opacifying power
* Excellent whiteness
* Low die deposit

General Information
Filler / Reinforcement	Titanium Dioxide, 60% filler by weight
Uses	Films Masterbatch Sheet
Agency Ratings	FDA not rated JHOSPA not rated
Forms	Particle
Processing Method	Blow film cast film Sheet extrusion molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.73	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	< 30	g/10 min	ASTM D1238
Moisture Content		%	ASTM D3030

Additional Information
Recommended dosage: 5 - 10%

Resin Grade	Manufacturer	Category	Trademark
RTP 2899 X 106530 N	RTP Company	TPO (POE)	RTP
Halene P M310	Haldia Petrochemicals Ltd.	PP Impact Copolymer	Halene P
Hostacom X M1 T06	LyondellBasell Industries	PP Copolymer	Hostacom
Dow Corning® C6-150	Dow Corning Corporation	Silicone	Dow Corning®
LNP™ LUBRICOMP™ Lexan_LF1520A compound	SABIC Innovative Plastics	PC	LNP™ LUBRICOMP™