Tecnoflon® FOR TF 838K

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IkEdhp_Tecnoflon-FOR-TF-838K.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR TF 838K is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68 % fluorine content. Tecnoflon® FOR TF 838K is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR TF 838K greatly reduces the reject rate due to adhesion and molding problems. Tecnoflon® FOR TF 838K shows low crosslinking density, in order to allow further addition of curatives. Some of the basic properties of Tecnoflon® FOR TF 838K are: Superior bonding to metal Very good scorch safety Outstanding processability Lack of mold fouling Excellent hot tear resistance Excellent mold release Tecnoflon® FOR TF 838K can be used for compression, injection and transfer molding of shaft seals, valve stem seals, O-rings, gaskets and seals. Tecnoflon® FOR TF 838K can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR TF 838K is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68 % fluorine content. Tecnoflon® FOR TF 838K is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR TF 838K greatly reduces the reject rate due to adhesion and molding problems.
Tecnoflon® FOR TF 838K shows low crosslinking density, in order to allow further addition of curatives.

Some of the basic properties of Tecnoflon® FOR TF 838K are:

Superior bonding to metal

Very good scorch safety

Outstanding processability

Lack of mold fouling

Excellent hot tear resistance

Excellent mold release

Tecnoflon® FOR TF 838K can be used for compression, injection and transfer molding of shaft seals, valve stem seals, O-rings, gaskets and seals. Tecnoflon® FOR TF 838K can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Bondability Good Adhesion Good Mold Release Good Processability Good Tear Strength Low Density Medium Viscosity Terpolymer
Uses	Belts/Belt Repair Blending Gaskets Hose Metal Bonding Profiles Seals Sheet Valves/Valve Parts
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	41	MU
Fluorine Content ²	68	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Melinex® 582	DuPont Teijin Films U.S.	Polyester, TP	Melinex®
TEREZ PA 6 7850 TD	TER HELL PLASTIC GMBH	Nylon 6	TEREZ PA 6
Nycal™ 2050R20	Technical Polymers, LLC	Nylon 612	Nycal™
Keyflex® BT 1035D	LG Chem Ltd.	TPC-ET	Keyflex® BT
LUVOCOM® 1-8719/RD	Lehmann & Voss & Co.	Nylon 66	LUVOCOM®