Order Products : sales@su-jiao.com

KMI PP KM-008IB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IidhZl_KMIPPKM008IB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KM-008IB is s high flow impact PP resin for injection molding applications. It exhibits high rigidity as well as excellent impact strength due to the ideal combination of highly crystalline homo matrix and well designed rubber morphology. This is suitable for the injection molding of large-scale articles which require high melt flowability. Food Contact Application: KM-008IB meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Characteristics: High stiffness and flowability Excellent balance between stiffness and imapct strength

Message

KM-008IB is s high flow impact PP resin for injection molding applications. It exhibits high rigidity as well as excellent impact strength due to the ideal combination of highly crystalline homo matrix and well designed rubber morphology. This is suitable for the injection molding of large-scale articles which require high melt flowability.

Food Contact Application:
KM-008IB meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.

Characteristics:

High stiffness and flowability

Excellent balance between stiffness and imapct strength

General Information
Features	Rigidity, high Rigidity, high High crystallization Impact copolymer Impact resistance, high High liquidity Compliance of Food Exposure
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	43	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	85		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	27.5	MPa	ASTM D638
Tensile Elongation (Break)	> 100	%	ASTM D638
Flexural Modulus	1420	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	69	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	110	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
RTP 281H	RTP Company	Nylon 66	RTP
Toraypef® 30025 AP16	Toray Resin Company	Polyolefin, Unspecified	Toraypef®
Baoding 65E90	Baoding Bangtai Polymeric New-Materials Co.,Ltd	TPU-Polyester	Baoding
Sylvin 8391-90UV Brown 7388	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Sylvin 8240-60 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin