Order Products : sales@su-jiao.com

PRIMALENE WPP793

Category:	HDPE , High Density Polyethylene
Manufacturer:	Southern Polymer, Inc.
Trademark:	PRIMALENE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IiSYal_PRIMALENE-WPP793.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

A blow molding grade high density polyethylene

Applications:

Food packaging

Liquid food containers (Milk, water, and juices)

Thermoformed parts

Features:

Excellent barrier properties

Excellent processing uniformity

Produces bottles with excellent appearance and rigidity

Imparts minimum odor and taste

FDA approved

General Information
Features	Food Contact Acceptable Good Processability Good Surface Finish High Density Low to No Odor Low to No Taste
Uses	Beverage Containers Containers Food Packaging Food Service Applications Non-specific Food Applications Packaging Thermoforming Applications
Agency Ratings	FDA Food Contact, Unspecified Rating
Processing Method	Blow Molding

Physical	Nominal Value	Unit	Test Method
Density	0.963	g/cm³	ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.73	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal)	10.0	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	32.0	MPa	ASTM D638
Tensile Elongation (Break)	350	%	ASTM D638
Flexural Modulus - Tangent	1720	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Tensile Impact Strength	126	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -76.1	°C	ASTM D746

Resin Grade	Manufacturer	Category	Trademark
NEXT REPROCESSED PA6 8267-300R	NEXT Specialty Resins, Inc.	Nylon 6	NEXT REPROCESSED
Alathon® 9301	LyondellBasell Industries	HDPE	Alathon®
Cevian® SER241	PlastxWorld Inc.	ABS	Cevian®
InnoPlus HD1100J	PTT Global Chemical Public Company Limited	HDPE	InnoPlus
Monprene® SP-13136 CLR (PRELIMINARY DATA)	Teknor Apex Company	TPE	Monprene®