Order Products : sales@su-jiao.com
InnoPlus HD6000F
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | PTT Global Chemical Public Company Limited |
| Trademark: | InnoPlus |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IgtLHd_InnoPlus-HD6000F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
InnoPlus HD6000F is high density polyethylene film grade which has special feature of output increment, good processability and drawdownability. This grade is suitable for high productivity or high speed machine to produce ultra thin films and general purpose films. InnoPlus HD6000F exhibits high mechanical strength, good stiffness and good heat sealability. Typical Application : bags on roll, shopping bags, T-Shirt bags, plastic gloves and other general purpose bags |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.956 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.16 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (25% Igepal, F50) | > 500 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 25.5 | MPa | |
| Break | 36.3 | MPa | |
| Tensile Elongation (Break) | 950 | % | ASTM D638 |
| Apparent Bending Modulus | 804 | MPa | ASTM D747 |
| Flexural Modulus | 1080 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1 | 260 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 125 | °C | ASTM D1525 2 |
| Peak Melting Temperature | 131 | °C | ASTM D3418 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 to 200 | °C | |
| Cylinder Zone 2 Temp. | 180 to 200 | °C | |
| Cylinder Zone 3 Temp. | 180 to 200 | °C | |
| Cylinder Zone 4 Temp. | 180 to 200 | °C | |
| Cylinder Zone 5 Temp. | 180 to 200 | °C | |
| Die Temperature | 190 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Non break |
| 2 . | Rate A (50°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Salflex 255E-1 | Salflex Polymers Ltd. | TPO (POE) | Salflex |
| VICTREX® PEEK 650GL30 | Victrex plc | PEEK | VICTREX® PEEK |
| Chemlon® 66GF4H | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| INNOPOL® PP CS 2-4630 FR | Inno-Comp Ltd. | PP Impact Copolymer | INNOPOL® PP |
| TORZEN® G3500HS1L NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
