Order Products : sales@su-jiao.com
BCC Resins BC 6128
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | BCC Products Inc. |
| Trademark: | BCC Resins |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ig5XM5_BCC-Resins-BC-6128.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BC 6128 is a black, non-staining, silicon carbide filled, "die surface" surfacing resin. This thixotropic resin system provides excellent surface duplication along with good vertical coverage. Extended mold life due to superior wear resistance and hardness are the major benefits derived from its use. This heat resistant system may be used at room temperature without post-curing. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 250°F can be accomplished in an oven or in use by a gradual heat rise; 2 hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 6128 can afford consistent use to 300°F if required. Does not contain VCHD or MDA. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.84 | g/cm³ | ASTM D792 |
| -- | 1.83 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 92 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Ultimate) | 51.4 | MPa | ASTM D638 |
| Flexural Strength (Break) | 81.4 | MPa | ASTM D790 |
| Compressive Strength | 199 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 121 | °C | ASTM D648 |
| CLTE - Flow | 3.8E-5 | cm/cm/°C | ASTM D696 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 7.0, Mix Ratio by Volume: 13 | ||
| Resin | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Pot Life (24°C) | 35 to 45 | min | |
| Demold Time (24°C) | 720 to 960 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bio-Flex® F 6510 | FKuR Kunststoff GmbH | Biodeg Polymers | Bio-Flex® |
| Asaprene™ T-436 | AKelastomers | SBS | Asaprene™ |
| Diakon® Frost 902 70 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| DIC.PPS FZ-1140-D5 | DIC Corporation | PPS | DIC.PPS |
| Haysite SMC 48600 | Haysite Reinforced Plastics | Polyester, TS | Haysite SMC |
