Order Products : sales@su-jiao.com
Filter-bond™ E-3505
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Hapco Inc. |
| Trademark: | Filter-bond™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | If0cxB_Filter-bond-E-3505.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Filter-bond is a series of casting and potting compounds ideally suited for medical and food contact applications. This Filter-bond E-SERIES is manufactured to ultra-high quality standards and has been used by customers to pass biocompatibility requirements. FILTER-bond E-3503 and E-3505 exhibit excellent bonding characteristics to various substrates, and are tough products with good physical properties. A few of the most common applications for E-3503 and E-3505 are filtration & ultra-filtration potting and sealing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.10 to 0.30 | % | ASTM D2566 |
| Weight - per cubic inch | 19 | g |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 11.0 to 21.0 | min | ASTM D2971 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 21.4 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 10.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 200 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 50.0 | °C | ASTM D648 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 14, Mix Ratio by Volume: 17 | ||
| Thermoset Mix Viscosity (25°C) | 43000 to 57000 | cP | ASTM D4878 |
| Demold Time 2(60°C) | 120 to 240 | min |
| Note Message | |
|---|---|
| 1 . | 100 g |
| 2 . | plus 12 hrs @ 21°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Thermoplastic Polyolefin FT4700-01A | RheTech, Inc. | Polyolefin, Unspecified | RheTech Thermoplastic Polyolefin |
| Mirakutoran® TPU K25MPSJW | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| SLOVAMID® 66 LI TS | Plastcom | Nylon 66 | SLOVAMID® 66 |
| ACCUTECH™ SAN930G30L | ACLO Compounders Inc. | SAN | ACCUTECH™ |
| POFEX 8200EP90M | POLYROCKS CHEMICAL CO., LTD | TPE | POFEX |
