Order Products : sales@su-jiao.com
ESTABLEND 6600
| Category: | ASA+PC , Acrylonitrile Styrene Acrylate + PC |
| Manufacturer: | Cossa Polimeri S.r.l. |
| Trademark: | ESTABLEND |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IdGLGZ_ESTABLEND-6600.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ESTABLEND 6600 is an acrylonitrile-styrene-acrylate PC (ASA PC) product,. It is available in Europe. ESTABLEND 6600 applications include electrical/electronic applications, electrical appliances, engineering/industrial accessories and automotive industries. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.13 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 25 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 - 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 58.0 | MPa | ASTM D638 |
| Fracture | 45.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 50 | % | ASTM D638 |
| Flexural Modulus | 2400 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 550 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| -- | 135 | °C | ASTM D1525 2 |
| -- | 123 | °C | ASTM D1525 3 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | HB | UL 94 | |
| 3.20 mm | HB | UL 94 | |
| Glow Wire Ignition Temperature (2.00 mm) | 750 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Mold Temperature | 50.0 - 70.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Injection Temperature: 220-250 °CInjection Pressure Level: Medium |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 标准 B (120°C/h), 压 力1 (10N) |
| 3 . | 标准 B (120°C/h), 载荷2 (50N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 6197-78 Natural | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Andur AL 80-5 AP-FP | Anderson Development Company | PUR-Eth,aliphat | Andur |
| Hanwha Total PE R908U | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | HDPE | Hanwha Total PE |
| Kemcor HD 8953 | Qenos Pty Ltd | HDPE Copolymer | Kemcor |
| ESTOPLAST SR 1500WW30 | Ester Industries Ltd. | ABS | ESTOPLAST SR |
