Order Products : sales@su-jiao.com
INEOS LDPE 19N930
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers Europe |
| Trademark: | INEOS LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Iakzwx_INEOS-LDPE-19N930.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
19N930 is a low-density polyethylene intended for injection molding. It is a medium MFR material, having good flow properties and allowing short cycle time. The moulded article is characterized by low degree of built-in stress, good stiffness, low warpage and high gloss. Applications: 19N930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for products like caps and closures, household goods and toys. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.920 | g/cm³ | ISO 1183/D |
| Melt Mass-Flow Rate (MFR) (190°C/0.325 kg) | 7.5 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Compression Molded) | 47 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Compression Molded | 9.00 | MPa | |
| Break, Compression Molded | 10.0 | MPa | |
| Tensile Strain (Break, Compression Molded) | 550 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (-20°C) | 75 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 88.0 | °C | ISO 306/A |
| Melting Temperature | 108 | °C | DSC |
| Note Message | |
|---|---|
| 1 . | Conditioned according to ISO 1872/1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMLLOY PBB101 | Polyram Ram-On Industries | PC+ABS | RAMLLOY |
| APEX® 78-A447H-3 | Teknor Apex Company | PVC, Flexible | APEX® |
| ESTABLEND 7800 | Cossa Polimeri S.r.l. | ASA+PC | ESTABLEND |
| MAGNUM™ 375 HH | Trinseo | ABS | MAGNUM™ |
| Petrotene® PP A3 T40 HS UV PRTA010 PH382 MSP | Petropol Industry and Trade of Polymers LTDA | PP Homopolymer | Petrotene® PP |
