Order Products : sales@su-jiao.com

Spartech Polycom SC5-2010

Category:	PP Copolymer , Polypropylene Copolymer
Manufacturer:	Spartech Polycom
Trademark:	Spartech
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IZEUwk_Spartech-Polycom-SC5-2010.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Spartech SC5-2010 is a medium viscosity PP copolymer resin for injection molding that features excellent long term heat aging properties, enhance weld line strength and a superior balance of stiffness and impact strength. This product complies with FDA regulations and thus may be safely used in food contact and packaging applications.

Polypropylene is a versatile thermoplastic offering a useful balance of heat and chemical resistance, good mechanical and electrical properties and processing ease. PP is resistant to deformation at elevated temperatures and resistant to impact at low temperatures.

A very versatile product for a wide variety of applications, Spartech SC5-2010 is recommended for industrial, automotive parts, battery containers and consumer products.

General Information
Features	Rigid, good High strength Copolymer Impact resistance, good Workability, good Good electrical performance Good heat aging resistance Low temperature impact resistance Good chemical resistance Heat resistance, high Compliance of Food Exposure Medium viscosity
Uses	Battery box Industrial application Application in Automobile Field
Agency Ratings	FDA Food Exposure, Not Rated
Appearance	Available colors Natural color
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.898	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)	8.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (23°C)	23.4	MPa	ASTM D638
Flexural Modulus (23°C)	993	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	140	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	100	°C	ASTM D648

Injection	Nominal Value	Unit
Drying Temperature	90.6	°C
Drying Time	1.0	hr
Rear Temperature	216 - 227	°C
Middle Temperature	221 - 232	°C
Front Temperature	227 - 238	°C
Nozzle Temperature	232 - 243	°C
Processing (Melt) Temp	204 - 260	°C
Mold Temperature	26.7 - 37.8	°C

Resin Grade	Manufacturer	Category	Trademark
TEDUR® L 9523	ALBIS PLASTIC GmbH	PPS	TEDUR®
NILENE® P	Taro Plast S.p.A.	PP Homopolymer	NILENE®
Alkathene® Ultra LDD203	Qenos Pty Ltd	LLDPE	Alkathene® Ultra
Axiall PVC 1901 Clear 7002	Axiall Corporation	PVC, Flexible	Axiall PVC
Panlite® L-1225Z100	TEIJIN LIMITED	PC	Panlite®