Order Products : sales@su-jiao.com
BLUESTAR® PBT 403G-M20
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Nantong Zhonglan Engineering Plastics Co., Ltd. |
| Trademark: | BLUESTAR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IOHUTd_BLUESTAR-PBT-403G-M20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BLUESTAR® PBT 403G-M20 is a Polybutylene Terephthalate (PBT) product filled with 20% mineral. It is available in Asia Pacific or North America. Typical application: Electrical/Electronic Applications. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.56 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (250°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.40 | % | |
| Across Flow | 0.70 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.17 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7000 | MPa | ASTM D638 |
| Tensile Strength (Break) | 100 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.5 | % | ASTM D638 |
| Flexural Modulus | 6000 | MPa | ASTM D790 |
| Flexural Strength | 170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Area) (23°C) | 10.0 | kJ/m² | ASTM D256 |
| Unnotched Izod Impact (Area) (23°C) | 60.0 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 219 | °C | |
| 1.8 MPa, Unannealed | 204 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.2E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 20 | kV/mm | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.800 mm | V-0 | ||
| 1.60 mm | V-0 | ||
| 3.20 mm | V-0 | ||
| Glow Wire Ignition Temperature | 750 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Flexiblend® PP-1301 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PP+EPDM | Flexiblend® |
| Optix® CA-1000 I | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
| Panlite® MN-4800Z | TEIJIN LIMITED | PC | Panlite® |
| PermaStat® 2800-70A | RTP Company | TPO (POE) | PermaStat® |
| Infino HN-1074 | LOTTE ADVANCED MATERIALS CO., LTD. | PC | Infino |
