Order Products : sales@su-jiao.com
Devcon HP 250
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Devcon |
| Trademark: | Devcon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | INiTQf_Devcon-HP-250.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
High performance epoxy with high shear strength and impact toughness for structural assembly applications. Intended Use:
Product Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Volume | 0.921 | cm³/g | |
| Solid content- by Volume | 100 | % |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Impact Resistance | 16.7 | J |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -55 - 121 | °C |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Work Time (22°C) | 1.1 | hr |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Shear Adhesion | 22.1 | MPa | ASTM D1002 |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.08 | g/cm³ |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Elongation (Break) | 25 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 19 | kV/mm | ASTM D149 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 100 Mixing ratio by capacity: 2.0 | ||
| Component B | Mixing ratio by weight: 42 Mixing ratio by capacity: 1.0 | ||
| Thermoset Mix Viscosity | 105000 | cP |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Curing Time (22°C) | 24 | hr |
| Note Message | |
|---|---|
| 1 . | Mixed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® FF 22 | Versalis S.p.A. | LDPE | Riblene® |
| CP PRYME® Nylon 6 N233HSL | Chase Plastics Services Inc. | Nylon 6 | CP PRYME® Nylon 6 |
| EUROPLEX® Sheet O | Evonik Industries AG | Nylon, Unspecified | EUROPLEX® Sheet |
| Dryflex® 4068 | ELASTO | TPE | Dryflex® |
| EPO-TEK® H20E-SLR-HV | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
