Order Products : sales@su-jiao.com
Devcon Zip Patch
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Devcon |
| Trademark: | Devcon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IMwsWF_Devcon-Zip-Patch.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A fast-setting patch system for making permanent, waterproof field repairs. Intended Use:
Product Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.10 | % | ASTM D2566 |
| Solid content- by Volume | 100 | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel strength- GBS | 6.1 | kN/m |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resistance | 63.0 | kJ/m² | ASTM D950 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Service Temperature | 93 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Shear Adhesion | |||
| ABS, PVC | 8.27 | MPa | |
| AL | 16.5 | MPa |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1320 | MPa | ASTM D638 |
| Tensile Strength | 68.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 15 - 25 | % | |
| Flexural Strength | 131 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 1.2E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 9.8 | kV/mm | ASTM D149 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 5.0 | min | |
| Thermoset Mix Viscosity | 17000 | cP |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Flash Point | 149 | °C | |
| Curing Time | 4.0 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4705 TFE 15 SI 2 | RTP Company | PTT | RTP |
| RJM SA122-29 | RJM International, Inc. | PC+ABS | RJM |
| Sindustris ABS LSH736 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Ultraform® N 2200 G53 UNC Q600 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| Sylvin 916VO Yellow 472 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
