Order Products : sales@su-jiao.com
InvisiSil™ IVS4622
| Category: | Silicone , Silicone |
| Manufacturer: | Momentive Performance Materials Inc. |
| Trademark: | InvisiSil™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IHubYG_InvisiSil-IVS4622.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
InvisiSil IVS4622 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer. Key Features and Benefits
Potential Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.04 | g/cm³ |
| Optical | Nominal Value | ||
|---|---|---|---|
| Refractive Index | 1.410 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 1 | Clear/Transparent | ||
| -- 2 | Clear/Transparent | ||
| Viscosity | |||
| 23°C 3 | 1.5 | Pa·s | |
| 23°C 4 | 2.4 | Pa·s | |
| 23°C 5 | 4.2 | Pa·s | |
| Curing Time (150°C) | 1.0 | hr | |
| Pot Life (23°C) | 480 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 55 | ||
| Lap Shear Strength | 3.20 | MPa | |
| Tensile Strength | 7.20 | MPa | |
| Tensile Elongation at Break | 100 | % | |
| Electric Strength | 30 | kV/mm | |
| Relative Permittivity (60 Hz) | 2.75 | ||
| Volume Resistivity | 2.0E+15 | ohms·cm | |
| Dissipation Factor (60 Hz) | 5.0E-4 |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| 3 . | Part B |
| 4 . | After Mixing |
| 5 . | Part A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen HF501N | LyondellBasell Industries | PP Homopolymer | Moplen |
| TAROMID A 280 K6 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| Ultraform® N 2310 P | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| Fiberfil® PP-60/TC/24/D/HS | Fiberfil® Engineered Plastics Inc. | PP Homopolymer | Fiberfil® |
| Enable™ 20-05HH | ExxonMobil Chemical | mPE | Enable™ |
