Order Products : sales@su-jiao.com
MACOMASS PVC MM-PVC E 1561
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | MACOMASS Verkaufs AG |
| Trademark: | MACOMASS PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IGmWsH_MACOMASS-PVC-MM-PVC-E-1561.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MACOMASS PVC MM-PVC E 1561 is a flexible polyvinyl chloride material,. This product is available in Europe and is processed by extrusion. The main characteristics of MACOMASS PVC MM-PVC E 1561 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.17 - 1.21 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 62 - 68 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 12.0 | MPa | ISO 527-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break) | > 400 | % | ISO 37 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 135 - 170 | °C |
| Extrusion instructions |
|---|
| Compression: 2:1 or 2.5:1Screw Length: >20 d |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ASTALON™ GS2020M | Marplex Australia Pty. Ltd. | PC | ASTALON™ |
| Kemcor LD 2203 Film | Qenos Pty Ltd | LDPE | Kemcor |
| KRYSTALFLEX™ PE900 | Huntsman Corporation | PUR-Eth,aliphat | KRYSTALFLEX™ |
| ESTOPLAST EP 1500GY166 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
| AIE PA 5010-ZG | Asia International Enterprise (Hong Kong) Limited | Nylon, Unspecified | AIE PA |
