Order Products : sales@su-jiao.com
Salflex 613TIC
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Salflex Polymers Ltd. |
| Trademark: | Salflex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IGfpgv_Salflex-613TIC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Salflex 613TIC is a polypropylene copolymer (PP Copoly) product, which contains 13% talc filler. It can be processed by injection molding and is available in North America. Typical application areas are: automotive industry. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 29 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.2 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 25.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 12 | % | ISO 527-2 |
| Flexural Modulus | 2010 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 4.5 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 60.0 | °C | ISO 75-2/B |
| Additional Information |
|---|
| Ash Content, ISO 3451/1A: 13% |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 - 90.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 180 - 210 | °C | |
| Middle Temperature | 190 - 220 | °C | |
| Front Temperature | 195 - 225 | °C | |
| Nozzle Temperature | 205 - 235 | °C | |
| Processing (Melt) Temp | 190 - 215 | °C | |
| Mold Temperature | 27.0 - 60.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| XYRON™ VN30V | Asahi Kasei Chemicals Corporation | PPE+PS | XYRON™ |
| CompaMid® PA 6 GF 15 | DimeLika Plast GmbH | Nylon 6 | CompaMid® |
| Plasmer 1035NM/1002 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
| Plenco 04568 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
| POLYfill PPH K8040 | Polykemi AB | PP Homopolymer | POLYfill |
