Order Products : sales@su-jiao.com
Hypro® PPC-T40
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Entec Polymers |
| Trademark: | Hypro® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IGVLeb_Hypro-PPC-T40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Copolymer Polypropylene, 40% Talc Reinforced, 10 Melt Flow |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 25.9 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 23°C | 6.0 | % | |
| Break, 23°C | 18 | % | |
| Flexural Modulus - Tangent (23°C) | 2480 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 46.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 118 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 4TECH® 9A22150 PS2 | 4Plas | Nylon 66 | 4TECH® |
| COTENE™ M1108 DIP | ICO Polymers EMEA, A Division of A. Schulman | Polyolefin, Unspecified | COTENE™ |
| Diakon® CLG960 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| KPOL-LDPE LD K-1.40/920 | KPOL Chem Co. | LDPE | KPOL-LDPE |
| O'Tech OW 633 AB | O'Tech Corporation | PVC, Unspecified | O'Tech |
