Order Products : sales@su-jiao.com
ELEVATE™ EM518
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | ELEVATE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IG9es1_ELEVATE-EM518.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Westlake ELEVATE™ EM518AA is an ethylene vinyl acetate copolymer with 18.5% VA. EM518AA is designed for use in applications such as injection molding, compounding, foaming, and general extrusion. This material has excellent low temperature brittleness properties, melt strength, and flexibility. Application/Uses: Injection Molding Compounding Foam |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 2.5 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 18.5 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec, Compression Molded) | 32 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 12.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 650 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 48.3 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 68.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 86.0 | °C | Internal method |
| Additional Information |
|---|
| Tests are run at 23°C (73°F) and 50% relative humidity. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PPcompound 5292 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| SAMAT 5003B | POLYROCKS CHEMICAL CO., LTD | PP, Unspecified | SAMAT |
| Royalite R722 | Spartech Plastics | PMMA+PVC | Royalite |
| SCANAMID 6 B11^FC | Polykemi AB | Nylon 6 | SCANAMID 6 |
| Iupilon® MB6001UR | Mitsubishi Engineering-Plastics Corp | PC+Acrylic | Iupilon® |
