Order Products : sales@su-jiao.com
Petrothene® GA584000
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IEhNUI_Petrothene-GA584000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PETROTHENE GA 584-000 exhibits exceptional flow for high speed molding of lids, while providing good ESCR and tear resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.929 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 110 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 59 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield 1 | 16.2 | MPa | ASTM D638 |
| Fracture | 12.4 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 9.3 | % | ASTM D638 |
| Flexural Modulus 3 | ASTM D790 | ||
| 1% secant | 524 | MPa | ASTM D790 |
| 2% secant | 483 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 50.0 | °C | ASTM D648 |
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 86.0 | °C | ASTM D1525 |
| Additional Information |
|---|
| Spiral Flow, Equistar Test Method, 0.625 in insert, 1000 psi injection pressure, 440°F melt temperature: 25.6 in |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 | °C | |
| Middle Temperature | 191 | °C | |
| Front Temperature | 204 | °C | |
| Nozzle Temperature | 204 | °C |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP HM3208SM | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Toler PE PE553 | Toler Chemical, Inc | HDPE | Toler PE |
| Catalyst CAT 10 | Solvay Specialty Polymers | Polyolefin, Unspecified | Catalyst |
| EXPLORE® CT PP | Matrix Polymers | PP, Unspecified | EXPLORE® |
| Axiall PVC DL-5009 | Axiall Corporation | PVC, Rigid | Axiall PVC |
