Order Products : sales@su-jiao.com
Silastic® Q7-7870
| Category: | Silicone , Silicone |
| Manufacturer: | Dow Corning Corporation |
| Trademark: | Silastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ICrPlq_SilasticQ77870.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Liquid Silicone Rubber (LSR) raw material for medical device and component fabrication in the Healthcare Industry APPLICATIONS Silastic® Q7-7840 Liquid Silicone Rubber, Silastic ® Q7-7850 Liquid Silicone Rubber, and Silastic ® Q7-7870 Liquid Silicone Rubber, Parts A and B, are heat-cured elastomers for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. Silastic Q7-7840 Liquid Silicone Rubber, Silastic Q7-7850 Liquid Silicone Rubber, and Silastic Q7-7870 Liquid Silicone Rubber are two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion. The elastomer is supplied as a two-part kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomers are thermally cured via an addition-cure (platinum catalyzed) reaction. When blended and cured as indicated the resulting elastomers consist of crosslinked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. The elastomer can be used without any post-cure. Furthermore, the cured elastomer is heat stable up to 204°C (400°F), can be autoclaved, and exhibits high gas permeability compared with most other thermoset elastomers and thermoplastics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 2.3 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 67 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (200% Strain) | 5.00 | MPa | ASTM D412 |
| Tensile Strength | 9.40 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 420 | % | ASTM D412 |
| Tear Strength 1 | 45.8 | kN/m | ASTM D624 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure Rate - MDR T90 2(150°C) | 31.0 | sec |
| Note Message | |
|---|---|
| 1 . | B mould |
| 2 . | 3 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 207 A TFE 15 | RTP Company | Nylon 6 | RTP |
| SABIC® STAMAX 30YM241 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® STAMAX |
| Pearlbond™ ECO D900 | Lubrizol Advanced Materials, Inc. | TPU, Unspecified | Pearlbond™ ECO |
| ESTOPLAST EP 1500WW06 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
| CERTENE™ LLI-2024 | Muehlstein | LLDPE | CERTENE™ |
