Order Products : sales@su-jiao.com
Mytex® AS14KW-02
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Mytex Polymers |
| Trademark: | Mytex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IC3Bxz_Mytex-AS14KW-02.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Talc filled compounded polypropylene produced forautomotive interior applications using Mytex@ Technology. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 21 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 94 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 27.0 | MPa | ASTM D638 |
| Flexural Modulus - Tangent 2 | 1750 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 66 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 114 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TELC 1025-70 | Teknor Apex Company | TPE | Telcar® |
| Trademark PE LLD2920G | Trademark Plastics Corporation | LLDPE | Trademark PE |
| Mylar® C (92 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| ADEKA EPU-73B | Adeka Corporation | Epoxy | ADEKA |
| Jamplast JPLGABS | Jamplast, Inc. | ABS | Jamplast |
