Order Products : sales@su-jiao.com

POTICON NT46

Category:	Nylon, Unspecified , Polyamide
Manufacturer:	Otsuka Chemical Co., Ltd.
Trademark:	POTICON
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IAto0f_POTICONNT46.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The Poticon series features a potassium titanate micro-filler compounded in thermoplastic resins to provide outstanding micro-reinforcement and dimensional stability. The excellent surface smoothness of these compounds limits friction toward opposing materials, reducing wear and allowing for greaseless applications. Moreover, as Poticon diminishes damage toward the mold and metal die and offers excellent recyclability, it also decreases processing costs.

Advantages

Microscopic reinforcement

Superior friction sliding and wear reduction

Excellent dimensional accuracy and surface smoothness

Highly recyclable

Applications

Automotive Parts (gears, bearings)

LED Reflectors

Watch Parts (gears, ground plane)

Camera (image stabilization parts)

Sliding Parts (gears, wheel bearing)

Camera Module Parts

Motor Parts (cog-wheels, bearings)

NT46 Property: Dimension accuracy, Toughness

General Information
Features	High Dimensional Stability Low friction coefficient Recyclable materials Good toughness
Uses	LEDs Gear Application in Automobile Field Camera application Bearing
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.32	g/cm³	ASTM D792
Molding Shrinkage
Flow	0.50	%
Transverse flow	1.3	%
Water Absorption (Equilibrium)	0.16	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	55		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	83.0	MPa	ASTM D638
Tensile Elongation (Break)	11	%	ASTM D638
Flexural Modulus	5200	MPa	ASTM D790
Flexural Strength	123	MPa	ASTM D790
Coefficient of Friction (vs. Steel - Dynamic)	0.53
Abrasion Loss
-- ¹	14.3	10^-3 mm³/N·km
of counterpart ²	0.00	10^-3 mm³/N·km

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	155	°C	ASTM D648

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	69	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
CLTE - Flow	2.0E-5	cm/cm/°C	ASTM D696

Injection	Nominal Value	Unit
Processing (Melt) Temp	210 - 260	°C
Mold Temperature	40 - 80	°C
Injection Pressure	60.0 - 120	MPa

Note Message
1 .	Surface pressure: 1MPa
2 .	Slipping velocity: 0.3m/sec

Resin Grade	Manufacturer	Category	Trademark
Shin-Etsu Elastomer KE-561U	Shin-Etsu Silicones of America	Silicone Rubber, HTV	Shin-Etsu Elastomer
Shandong PA66 A2LG6301	Shandong Dongchen Engineering Plastics Co., Ltd.	Nylon 66	Shandong PA66
TAIRIREX GP550N	Formosa Plastics Corporation	PS (GPPS)	TAIRIREX
Ghaed ABS ABS-90s	Ghaed Basir Petrochemicals Co.	ABS	Ghaed ABS
KumhoSunny ABS HU650SK-P	Shanghai KumhoSunny Plastics Co., Ltd.	ABS	KumhoSunny ABS