Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic PVDF 110080001

Category:	PVDF , Polyvinylidene Fluoride
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IA0tgl_3M-Dyneon-Fluoroplastic-PVDF-110080001.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

PVDF is ideal for multiple applications across a wide array of industries. Widely used in the chemical processing, wire and cable, semiconductor, and oil and gas industries. PVDF is also gaining recognition in automotive, building, electronics, food processing, pharmaceutical and battery applications.

PVDF 11008/0001 combines excellent chemical resistance, dimensional stability and excellent flame and smoke resistance with a moderate degree of flexibility. (For applications requiring high degrees of flexibility, see our 30000 series copolymers.) PVDF 11008/0001 has set the standard for plenum rating jacketing and tubes, consistently achieving UL 150°C rating in numerous cable constructions and fiber raceway designs.

General Information
Features	Copolymer Good Abrasion Resistance Good Chemical Resistance Good Dimensional Stability Good Toughness Good UV Resistance Good Weather Resistance High Strength Low Gas Permeability Low Liquid Permeability Solvent Resistant
Uses	Automotive Applications Batteries Construction Applications Electrical/Electronic Applications Non-specific Food Applications Oil/Gas Applications Pharmaceuticals Wire & Cable Applications
Forms	Granules
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Density	1.78	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ASTM D1238
230°C/2.16 kg	8.0	g/10 min
230°C/5.0 kg	24	g/10 min
Water Absorption ¹(23°C, 24 hr)	< 0.040	%	ISO 62

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Break, 23°C)	47.0	MPa	ASTM D638
Tensile Elongation ³(Break, 23°C)	600	%	ASTM D638
Flexural Modulus ⁴(23°C)	1000	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	160	°C	ASTM D3418

Note Message
1 .	Method 1
2 .	50 mm/min
3 .	50 mm/min
4 .	2.0 mm/min

Resin Grade	Manufacturer	Category	Trademark
Promyde® B25	NUREL, S.A.	Nylon 6	Promyde®
BCC Resins BC 7009-2	BCC Products Inc.	Epoxy	BCC Resins
ELASTOSIL® R 755/60	Wacker Chemie AG	Silicone	ELASTOSIL® R
Hylex® P1017G10FRMA	Ravago Manufacturing Americas, LLC	PC	Hylex®
ISOTAL™ C27	SABIC Innovative Plastics Europe	Acetal (POM) Copolymer	ISOTAL™