Order Products : sales@su-jiao.com

Ingeo™ 6252D

Category:	PLA , Polylactic Acid
Manufacturer:	NatureWorks® LLC
Trademark:	Ingeo™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	I9iigQ_Ingeo-6252D.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Ingeo biopolymer 6252D, a NatureWorks LLC product, is a thermoplastic fiber-grade resin derived from annually renewable resources. Available in lubricated pellet form, 6252D is designed for meltblown products using conventional as well as high pressure die meltblown equipment. Ingeo biopolymer 6252D can be converted into a broad range of fiber products. See table at right for typical polymer properties.

Potential applications for Ingeo biopolymer 6252D include:

Wipes

Geotextiles

Hospital garments

Absorbent pad liners

Personal hygiene products

Agriculture/horticultural products

Filtration products

General Information
Additive	Lubricant
Features	Comstable Updatable resources Lubrication Biodegradable Compliance of Food Exposure
Uses	Geo Membranes Meltblown Nonwovens Textile applications Filter material Agricultural application Bathroom products Fabric
Agency Ratings	ASTM D 6400 EN 13432 FDA Food Exposure, Not Rated Europe 10/1/2011 12:00:00 AM European 2002/72/EC
Forms	Particle
Processing Method	Meltblown Nonwovens

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.24	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (210°C/2.16 kg)	70 - 85	g/10 min	ASTM D1238
Relative Viscosity	2.50		Internal method

Additional Information	Nominal Value	Unit
Denier - per filament ¹	1.00 - 2.00
Fabric Weight	various

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	55.0 - 60.0	°C	ASTM D3417
Peak Crystallization Temperature (DSC)	155 - 170	°C	ASTM D3418

Fill Analysis	Nominal Value	Unit
Melt Density (230°C)	1.08	g/cm³

Extrusion	Nominal Value	Unit
Drying Temperature	80.0	°C
Drying Time	4.0 - 6.0	hr
Suggested Max Moisture	< 5.0E-3	%
Melt Temperature	220 - 245	°C

Extrusion instructions
L/D Ratio: 24:1 to 30:1Compression Ratio: 3:1

Note Message
1 .	g/9000m

Resin Grade	Manufacturer	Category	Trademark
MBA PP 2123	MBA Polymers	PP Copolymer	MBA PP
PrimaFlex® CP 2012	Plastic Solutions, Inc.	PP Impact Copolymer	PrimaFlex®
WPP PP PPH3CF3.5-Black	Washington Penn Plastic Co. Inc.	PP Homopolymer	WPP PP
UNISOFT TPE™ ST-88A-NT-2-01	UNITED SOFT PLASTICS, Inc.	SEBS	UNISOFT TPE™
DynaMix™ 2044-GBID	Polymer Dynamix	Nylon, Unspecified	DynaMix™