Order Products : sales@su-jiao.com
RTP 1202-65D
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | I8hhBH_RTP-1202-65D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.32 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18 mm, Injection Molded | 0.20 | % | |
| 6.35 mm, Injection Molded | 0.40 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 1380 | MPa | ASTM D638 |
| Tensile Strength | 41.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1240 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 34.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 320 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1400 | J/m | ASTM D4812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 to 210 | °C | |
| Middle Temperature | 160 to 210 | °C | |
| Front Temperature | 160 to 210 | °C | |
| Mold Temperature | 38.0 to 60.0 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NORDEL™ IP 4820 | The Dow Chemical Company | EPDM | NORDEL™ |
| Baoding 76-90M | Baoding Bangtai Polymeric New-Materials Co.,Ltd | TPU-Polyester | Baoding |
| OP - PC - Unfilled 68-FDA | Oxford Polymers | PC | OP - PC - Unfilled |
| POLIMAXX 2500H | IRPC Public Company Limited | PP Impact Copolymer | POLIMAXX |
| Formolene® 2520N | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
