Order Products : sales@su-jiao.com
STARGUM P 702 naturale
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Daloga srl |
| Trademark: | STARGUM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | I8158d_STARGUM-P-702-naturale.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| STARGUM P 702 naturale is a Thermoplastic Elastomer (TPE) material. It is available in Europe for extrusion. |
| General Information | |
|---|---|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.26 to 1.30 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 30 sec) | 84 to 88 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 32.4 to 39.6 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 580 to 700 | % | ISO 527-2 |
| Abrasion Resistance | 37.0 to 47.0 | mm³ | DIN 53516 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Stability | > 80 | ISO R 182 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Resistance Against Saponification | < 200 | mg KOH/g | HD 22.10 S1 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 77.0 to 87.0 | kN/m | DIN 53515 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | < -30 | % | UL 1581 |
| Change in Ultimate Elongation in Air (100°C, 168 hr) | < -30 | % | UL 1581 |
| Change in Tensile Strength | UL 1581 | ||
| 90°C, 168 hr, in ASTM #2 Oil | < -30 | % | |
| 121°C, 18 hr, in ASTM #2 Oil | < -30 | % | |
| Change in Ultimate Elongation | UL 1581 | ||
| 90°C, 168 hr, in ASTM #2 Oil | < -30 | % | |
| 121°C, 18 hr, in ASTM #2 Oil | < -30 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ductile / Brittle Transition Temperature | -43.0 to -39.0 | °C | ISO 458 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | > 5.0E+13 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 26 to 29 | % | ISO 4589-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Wire & Cable GTPO9005 | S&E Specialty Polymers, LLC | TPO (POE) | S&E Wire & Cable |
| Mediprene® 500350M | ELASTO | SEBS | Mediprene® |
| SCHULAMID® 6 GF 30 H BLACK REC | A. Schulman Europe | Nylon 6 | SCHULAMID® |
| Shanghai Ofluorine PVDF PF-1 | Shanghai Ofluorine Chemical Technology Co., Ltd | PVDF | Shanghai Ofluorine PVDF |
| Hylon® N1000TL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
