Order Products : sales@su-jiao.com
INSULCAST® RTVS 51
| Category: | Silicone Rubber, RTV-2 , Silicone Rubber, RTV-2 |
| Manufacturer: | ITW Polymers Coatings North America |
| Trademark: | INSULCAST® RTVS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HxR6xb_INSULCAST-RTVS-51.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RTVS 51 is a low temperature flexible, easily pourable methyl phenyl RTV Silicone sealant/encapsulant. The RTVS 51 can be used with a wide variety of curing agents, thus varying pot life, cure time, mix ratios and cure conditions (See RTVS Catalyst Selector Guide). |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 50 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 2.62 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 170 | % | ASTM D412 |
| Tear Strength 1 | 4.38 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 2.2E-4 | cm/cm/°C | |
| Thermal Conductivity | 0.31 | W/m/K | |
| Service Temperature | -115 to 232 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Mixing Ratio - by weight 2 | 0.10 to 0.50 | % |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Linear Shrinkage | 0.20 to 0.60 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength | 20 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 3.60 | ASTM D150 | |
| Dissipation Factor (1 kHz) | 5.0E-3 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shelf Life (25°C) | 26 | wk |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | White | ||
| Density | 1.25 | g/cm³ | |
| Viscosity | 12 | Pa·s | ASTM D2393 |
| Pot Life 3(25°C) | 15 to 120 | min |
| Note Message | |
|---|---|
| 1 . | Die B |
| 2 . | w/CAT-2 |
| 3 . | varies w/% of CAT 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen EP448V | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| NYLOY® NG-1020NM | Nytex Composites Co., Ltd. | Nylon 6 | NYLOY® |
| Adell Polyamide AJ-33 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| HiFill® PP GF/M40 CC NAT | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
| OnFlex™ S EF 40A-3S1964 | PolyOne Corporation | TPE | OnFlex™ |
