Order Products : sales@su-jiao.com
INFUSE™ 9817
| Category: | OBC , Olefin Block Copolymer |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | INFUSE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HtNgtT_INFUSE-9817.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
INFUSE™ 9817 Olefin Block Copolymer is a high performance olefin block copolymer that offers excellent performance in durable, flexible injection molded industrial and consumer goods. INFUSE 9817 has a higher set up temperature, which allows for faster injection molding cycle times. In addition, its high crystallization temperature and lower density drive to lower production cost by reducing cycle time and reducing part weight. Main Characteristics:
Complies with
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.877 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 15 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, Compression Molded) | 71 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant (Compression Molded) | 2.31 | MPa | ASTM D638 |
| Tensile Strength (Break, Compression Molded) | 7.00 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 1500 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 7.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1700 | % | ASTM D412 |
| Tear Strength | 31.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 21°C | 15 | % | |
| 70°C | 58 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 120 | °C | Internal Method |
| TMA 1(1.00 mm) | 95 | °C | Internal Method |
| Note Message | |
|---|---|
| 1 . | 1N, 5°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bamtac BVA339A | Ningbo Bamtac New Material Col, Ltd. | EVA | Bamtac |
| Favorite REG250 | Favorite Plastics | PE, Unspecified | Favorite |
| KOPLA PA6 KNT1030 | KOPLA Co., Ltd. | Nylon 6 | KOPLA PA6 |
| Sylvin 8200-85 Grey 9568 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ESTOPLAST EP 4030BB02 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
