Monprene® IN-22958D (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene IN-22958D XRD1 is a high performance thermoplastic elastomer designed specifically for demanding industrial applications including slip coats. Monprene IN-22958D is a high hardness, low density, UV stabilized, unfilled grade with a low coefficient of friction that can be processed by extrusion, co-extrusion and thin extrusion coating.

General Information
Features	Low Specific Gravity Without Fillers Low density High smoothness Light stabilization Good UV resistance Good adhesion Medium liquidity Lubrication High hardness
Uses	Thin coating Washer Industrial application Pipe fittings Rubber substitution Profile
RoHS Compliance	RoHS compliance
Appearance	Natural color
Forms	Particle
Processing Method	Co-extrusion molding Extrusion Coating

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.888	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	10	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw D, 1 sec	56	ASTM D2240
Shaw D, 5 seconds	53	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
Transverse flow : 100% strain	10.2	MPa	ASTM D412
Flow : 100% strain	12.8	MPa	ASTM D412
Transverse flow : 300% strain	10.7	MPa	ASTM D412
Flow : 300% strain	13.1	MPa	ASTM D412
Tensile Strength ²			ASTM D412
Transverse flow : Fracture	12.2	MPa	ASTM D412
Flow : Fracture	14.8	MPa	ASTM D412
Tensile Elongation ³			ASTM D412
Transverse flow : Fracture	350	%	ASTM D412
Flow : Fracture	660	%	ASTM D412
Tear Strength ⁴			ASTM D624
Transverse flow	81.3	kN/m	ASTM D624
Flow	153	kN/m	ASTM D624
Compression Set ⁵			ASTM D395B
23°C, 22 hr	26	%	ASTM D395B
70°C, 22 hr	57	%	ASTM D395B

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	204 - 227	°C
Cylinder Zone 2 Temp.	204 - 227	°C
Cylinder Zone 3 Temp.	204 - 227	°C
Cylinder Zone 4 Temp.	204 - 227	°C
Cylinder Zone 5 Temp.	204 - 227	°C
Die Temperature	204 - 227	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm;Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	HruvMK_MonpreneIN22958DPRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Tecnoflon® FOR 9383	Solvay Specialty Polymers	Fluorelastomer	Tecnoflon®
TECHNYL® C 216 V15 BLACK 61	Solvay Engineering Plastics	Nylon 6	TECHNYL® C
Texin® 985	Covestro - PUR	TPU-Polyether	Texin®
Plantic® R1	Plantic Technologies Limited	Biodeg Polymers	Plantic®
Plaslube® PA6/6,6 109 L	Techmer Engineered Solutions	Nylon 66/6	Plaslube®