Order Products : sales@su-jiao.com
Elastocon® SMR1600
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HnanzN_Elastocon-SMR1600.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Elastocon® SMR1600 thermoplastic polyolefin elastomer has been developed for applications that require low temperature impact resistance and a high gloss scratch and mar resistant surface finish. Elastocon® SMR1600 is well suited for consumer goods and industrial applications requiring U.V. stability and excellent low temperature stability. Elastocon® SMR1600 provides a non-bloom surface. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 64 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 16.0 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 20.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 540 | % | ASTM D412 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact (-30°C, Ductile) | 39.2 | J | ASTM D3763 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 200 - 225 | °C | |
| Front Temperature | 200 - 230 | °C | |
| Nozzle Temperature | 200 - 235 | °C | |
| Mold Temperature | 21.0 - 49.0 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.689 - 1.38 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 79.0 | °C | |
| Cylinder Zone 1 Temp. | 191 - 232 | °C | |
| Cylinder Zone 2 Temp. | 191 - 232 | °C | |
| Cylinder Zone 3 Temp. | 191 - 232 | °C | |
| Cylinder Zone 4 Temp. | 191 - 232 | °C | |
| Cylinder Zone 5 Temp. | 191 - 232 | °C | |
| Die Temperature | 232 | °C |
| Extrusion instructions |
|---|
| Compression ratio: 2.5 to 3.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 6001-40A | RTP Company | TPE | RTP |
| Sindustris PC GP1001LS | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| TRILAC® ABS-HS5500 | Polymer Technology and Services, LLC | ABS | TRILAC® |
| Adell PS IV-11-N | Adell Plastics, Inc. | PS (HIPS) | Adell PS |
| LEXAN™ 945U resin | SABIC Innovative Plastics | PC | LEXAN™ |
