Order Products : sales@su-jiao.com

Braskem PP R7050-02N

Category:	PP Random Copolymer , Polypropylene Random Copolymer
Manufacturer:	Braskem Europe GmbH
Trademark:	Braskem PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Hmvp85_Braskem-PP-R7050-02N.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Braskem R7050-02N Polypropylene Resin is a random copolymer developed for sheet extrusion and blow moulding applications. Braskem R7050-02N Polypropylene Resin features high clarity. Applications for Braskem R7050-02N Polypropylene Resin: Blow molded containers Thermoformed containers Regulatory Information Braskem R7050-02N Polypropylene Resin should comply with U.S. FDA 21 CFR 177.1520(c)3.1a and EU, No 10/2011. It is the responsibility of the manufacturers of food contact articles and industrial food packers to make sure the articles in their actual use are in compliance with the imposed migration requirements. The appropriate regulations should be consulted for more detailed information. Compliance letters can be obtained through the Braskem sales representative.

Message

Braskem R7050-02N Polypropylene Resin is a random copolymer developed for sheet extrusion and blow moulding applications. Braskem R7050-02N Polypropylene Resin features high clarity.

Applications for Braskem R7050-02N Polypropylene Resin:

Blow molded containers

Thermoformed containers

Regulatory Information
Braskem R7050-02N Polypropylene Resin should comply with U.S. FDA 21 CFR 177.1520(c)3.1a and EU, No 10/2011.
It is the responsibility of the manufacturers of food contact articles and industrial food packers to make sure the articles in their actual use are in compliance with the imposed migration requirements. The appropriate regulations should be consulted for more detailed information. Compliance letters can be obtained through the Braskem sales representative.

General Information
Agency Ratings	EU No 10/2011 FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	2.0	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, Injection Molded)	25.0	MPa	ISO 527-2
Tensile Strain (Yield, Injection Molded)	12	%	ISO 527-2
Flexural Modulus (Injection Molded)	840	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
0°C, Injection Molded	4.0	kJ/m²
23°C, Injection Molded	18	kJ/m²

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature ¹(0.45 MPa, Unannealed)	80.0	°C	ISO 75-2/B
Vicat Softening Temperature ²	129	°C	ISO 306/A

Optical	Nominal Value	Unit	Test Method
Haze (1000 µm, Injection Molded)	12	%	ASTM D1003

Note Message
1 .	Injection Molded
2 .	Injection Molded

Resin Grade	Manufacturer	Category	Trademark
Radilon® A USZ200 100 NAT	Radici Plastics	Nylon 66	Radilon®
Ferro PP LPP20BN53HB	Ferro Corporation	PP, Unspecified	Ferro PP
Hanwha Total PE P200Y50	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	HDPE	Hanwha Total PE
Hifax TRC 277P S71487	LyondellBasell Industries	PP Copolymer	Hifax
3M™ Dyneon™ Fluoroelastomer E-20575	3M Advanced Materials Division	Fluorelastomer	3M™ Dyneon™ Fluoroelastomer