Order Products : sales@su-jiao.com
Elastocon® STK50
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HlOIy2_ElastoconSTK50.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® STK50 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK50 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK50 can be overmolded to PC, ABS, PC/ABS, Acrylic, and PS. Elastocon® STK50 is supplied as ready to use pellets in 50 lb. bag quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.40 | MPa | ASTM D412 |
| Tensile Strength | 4.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 540 | % | ASTM D412 |
| Tear Strength | 18.4 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 210 - 216 | °C | |
| Middle Temperature | 216 - 266 | °C | |
| Front Temperature | 227 - 277 | °C | |
| Mold Temperature | 27 - 49 | °C | |
| Back Pressure | 0.517 - 1.21 | MPa |
| Injection instructions |
|---|
| Injection Rate: 1-5 in/secElastocon® STK50 thermoplastic elastomer compound does not require drying. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 3M™ Dyneon™ PTFE Compound TF 3105 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
| ALTECH® PA66 A 1000/510 IM | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Evoprene™ 091 | AlphaGary | SBS | Evoprene™ |
| INEOS HDPE HP50-25-153 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
| LNP™ THERMOCOMP™ LF002 compound | SABIC Innovative Plastics | PEEK | LNP™ THERMOCOMP™ |
