Order Products : sales@su-jiao.com

PrimoTuff 5000E

Category:	TPO (POE) , Thermoplastic Polyolefin Elastomer
Manufacturer:	KMI Group Inc.
Trademark:	PrimoTuff
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Hgu7Zp_PrimoTuff-5000E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Thermoplastic Polyolefins are rigid products with exceptional dimensional stability and good balance of impact and toughness. PureTuff is offered in a wide range of melt flows (MFR 0.5 to 100) suitable for profile extrusion, sheet extrusion and molding applications. Exceptional cold temperature impact. Depending on product rigidity, some products are ductile to as low as -30°C. Excellent dimensional stability Outstanding rigidity Fully Weatherable Recyclable PPI will customize to adjust for mold shrink required by the customer Full range of colors

Message

Thermoplastic Polyolefins are rigid products with exceptional dimensional stability and good balance of impact and toughness. PureTuff is offered in a wide range of melt flows (MFR 0.5 to 100) suitable for profile extrusion, sheet extrusion and molding applications.

Exceptional cold temperature impact. Depending on product rigidity, some products are ductile to as low as -30°C.

Excellent dimensional stability

Outstanding rigidity

Fully Weatherable

Recyclable

PPI will customize to adjust for mold shrink required by the customer

Full range of colors

General Information
Features	Good Dimensional Stability Good Impact Resistance Good Toughness Good Weather Resistance High Rigidity Low Temperature Impact Resistance Recyclable Material
Processing Method	Injection Molding Profile Extrusion Sheet Extrusion

Physical	Nominal Value	Unit
Density	1.18	g/cm³
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.90	g/10 min

Mechanical	Nominal Value	Unit
Tensile Strength (Yield)	28.0	MPa
Flexural Modulus	3000	MPa

Impact	Nominal Value	Unit
Notched Izod Impact Strength
23°C	25	kJ/m²
30°C, Complete Break	4.0	kJ/m²

Thermal	Nominal Value	Unit
Heat Deflection Temperature (0.45 MPa, Unannealed)	115	°C
CLTE - Flow	3.5E-5	cm/cm/°C

Additional Information	Nominal Value	Unit
AMMS	0.80	%
Ductility	-15	°C

Resin Grade	Manufacturer	Category	Trademark
RODRUN LC-5000	UNITIKA Plastics Division	LCP	RODRUN
RJM 901G4	RJM International, Inc.	Acetal (POM) Copolymer	RJM
SEPAZ™ LUB4343	Mando Advanced Materials Co., Ltd.	PPS	SEPAZ™
Europrene® N 3980	Versalis S.p.A.	NBR	Europrene®
ICORENE® 6152 OSF	ICO Polymers EMEA, A Division of A. Schulman	LLDPE	ICORENE®