Order Products : sales@su-jiao.com
Borealis PE MG9621
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borealis PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HgElmN_Borealis-PE-MG9621.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| MG9621 - is a high-density polyethylene produced by a low pressure process. The product is available in natural colour. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.962 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 12 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 62 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 1250 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, Injection Molded) | 30.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, Injection Molded) | 7.0 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.0 | kJ/m² | ISO 179/1eA |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 200 - 260 | °C | |
| Mold Temperature | 10.0 - 40.0 | °C |
| Injection instructions |
|---|
| Holding Pressure: As low as possible |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PA6 B 2030/209 GF30 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Fainplast PVC RH 225 | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| Estane® 58134 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estane® |
| LETOXIT PR 217 | 5M s.r.o. | Epoxy | LETOXIT |
| Sylvin 5150-65 Grey 9499 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
