Order Products : sales@su-jiao.com
EASYPOXY® K-20
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | EASYPOXY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Hbi9L4_EASYPOXY-K-20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EASYPOXY K-20 is a general purpose, two-component, room-temperature curing adhesive/sealant that bonds a wide variety of surfaces. EASYPOXY K-20 is relatively insensitive to mixing ratios. Since there are no solvents, there is no fire hazard. EASYPOXY K-20 is non-toxic when cured and is widely used for bonding, sealing, and repairing metal, wood, rubber, and most plastics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | |
| Molding Shrinkage - Flow | 0.70 | % | |
| Water Absorption 1(25°C, 24 hr) | 0.40 | % | |
| Viscosity | |||
| Part A : 25°C | Paste | ||
| Part B : 25°C | Paste |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Fungal Resistance | Non-nutrient |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 85 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 20.7 | MPa | |
| Flexural Strength | 41.4 | MPa | |
| Compressive Strength | 68.9 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity | 0.24 | W/m/K |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Volume Resistivity (25°C) | 4.0E+13 | ohms·cm | |
| Dielectric Constant (25°C, 1 kHz) | 4.60 | ||
| Dissipation Factor (25°C, 1 kHz) | 0.012 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 45 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Pot Life (25°C) | 20 | min | |
| Shelf Life | 78 | wk | |
| Demold Time | |||
| 25°C | 1400 | min | |
| 65°C | 120 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Lap Shear Strength 2 | |||
| -55°C | 11.0 | MPa | |
| 25°C | 17.2 | MPa | |
| 82°C | 15.9 | MPa |
| Note Message | |
|---|---|
| 1 . | Immersion |
| 2 . | Etched AL/AL |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC M6113 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Santron IMS1000 SPARKLE | Bhansali Engineering Polymers Limited | SAN | Santron |
| WELLAMID Nylon 6000 SCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
| Durethan® BKV 35 H2.0 EF 900116 | LANXESS Corporation | Nylon 6 | Durethan® |
| POLYCASA® XT | Polycasa | Acrylic (PMMA) | POLYCASA® |
