Order Products : sales@su-jiao.com

Jam HF-4760(BL3)

Category:	HDPE , High Density Polyethylene
Manufacturer:	Jam Petrochemical Company
Trademark:	Jam
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Haqwnz_JamHF4760BL3.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HF-4760(BL3) is a blow molding grade resin with high density polyethylenee with 1-Butene as co monomer which is manufactured by the suspension polymerization of ethylene monomer. Stiffness, good ESCR are it's spetial properties. High rigidity and good flowablity which made it proper for usage in bottles and small blow molding goods. Features High density and Stiffness Good flowabilitty and impact Strength Good Stress Cracking resistance. Applications Small blow moulding Bottles Containers (up to 5 lit ) Packing of pharmaceuticals & surfactants

Message

HF-4760(BL3) is a blow molding grade resin with high density polyethylenee with 1-Butene as co monomer which is manufactured by the suspension polymerization of ethylene monomer. Stiffness, good ESCR are it's spetial properties. High rigidity and good flowablity which made it proper for usage in bottles and small blow molding goods.

Features

High density and Stiffness

Good flowabilitty and impact Strength

Good Stress Cracking resistance.

Applications

Small blow moulding Bottles

Containers (up to 5 lit )

Packing of pharmaceuticals & surfactants

General Information
Additive	Antioxidation Lubricant
Features	Good ESCR (Stress Crack Resist.) Butene comonomer Rigidity, high Rigidity, high High density Antioxidation Impact resistance, good Good liquidity Lubrication
Uses	Packaging Blow molding applications Bottle Container Drug packaging
Processing Method	Blow molding

Physical	Nominal Value	Unit	Test Method
Density	0.954	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/21.6 kg	23	g/10 min	ISO 1133
190°C/5.0 kg	1.2	g/10 min	ISO 1133
Flow Rate Ratio - 21.6/5	19.0

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C, Compression Molded)	9.0	kJ/m²	ISO 179/1eA

Resin Grade	Manufacturer	Category	Trademark
RTP 2299 X 133087 A EG	RTP Company	PEEK	RTP
SEQUEL® 1825	LyondellBasell Industries	TPO (POE)	SEQUEL®
Staramide RF006XXP	Eurostar Engineering Plastics	Nylon 66	Staramide
GAPEX® RPP10EU07NA	Ferro Corporation	PP, Unspecified	GAPEX®
ALTECH® PP-B A 2040/150 GF40	ALBIS PLASTIC GmbH	PP Copolymer	ALTECH® PP-B