Order Products : sales@su-jiao.com
Generic Nylon+PP - Glass Fiber
| Category: | Nylon+PP , Polyamide + PP |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HakVXv_Generic-Nylon-PP---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon+PP - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 to 1.38 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.20 to 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break, 23°C) | 3.9 to 5.0 | % | ASTM D638 |
| Flexural Modulus (23°C) | 945 to 9350 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 110 to 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 188 to 249 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PPcompound 7890A | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| SLOVAMID® 6 GF 35 FRC 5 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Bergamid™ A70 G25 U-SO TM | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Avantra® 8130 | PMC Group Polymer Products | PS (HIPS) | Avantra® |
| Etinox® EK-5910 | Ercros, S.A. | PVC, Flexible | Etinox® |
