Order Products : sales@su-jiao.com
UBESTA 3030JFX1
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | UBE Industries, Ltd. |
| Trademark: | UBESTA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HZEGDg_UBESTA-3030JFX1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Flexible (Extrusion) |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Part Marking Code |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.03 | g/cm³ | ISO 1183 |
| Molding Shrinkage | Internal Method | ||
| Across Flow | 1.5 | % | |
| Flow | 0.90 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.60 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 26.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 50 | % | ISO 527-2 |
| Flexural Modulus | 400 | MPa | ISO 178 |
| Flexural Stress | 20.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 120 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 80.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 45.0 | °C | ISO 75-2/A |
| CLTE - Flow | 1.9E-4 | cm/cm/°C | ISO 11359-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WACKER® E 32 SILICONE WAX EMULSION | Wacker Chemie AG | Silicone | WACKER® |
| Next Nylon 6 Prime Series NG40-01NC | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Prime Series |
| CYCOLAC™ INP630 resin | SABIC Innovative Plastics | ABS+SAN | CYCOLAC™ |
| Elastron® V V201.A73.N | Elastron USA, Inc. | TPV | Elastron® V |
| LubriOne™ AT-000/18T-2S BLK | PolyOne Corporation | Acetal (POM) Copolymer | LubriOne™ |
