Order Products : sales@su-jiao.com
HYDEX® 4101
| Category: | Polyester, TP , Thermoplastic Polyester |
| Manufacturer: | Ensinger Inc. |
| Trademark: | HYDEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HYGmEg_HYDEX-4101.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HYDEX® 4101 & 4101L (lubricated) is a very stable chemical compound that can withstand high impact without deterioration. It is approved for direct contact with food by the FDA and is ideal for machined parts in food processing equipment. HYDEX™ 4101 has excellent resistance to typical cleaning chemicals such as chlorine and caustic solutions and has a very low moisture absorption rate, as much as 15 times less than nylon. HYDEX® 4101 & 4101L (lubricated) exhibits a broad range of outstanding properties for a variety of applications, especially in the food processing industry. It is ideal for applications such as cams, bearings, gears, food pistons, wear strips, scraper blades, valve bodies and conveyor components. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.070 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2930 | MPa | ASTM D638 |
| Tensile Strength (Break) | 64.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 50 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2900 | MPa | ASTM D790 |
| Coefficient of Friction | Internal Method | ||
| vs. Steel - Dynamic | 0.25 | ||
| vs. Steel - Static | 0.19 | ||
| Wear Factor 1 | 420 | 10^-8 mm³/N·m | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 93.3 | °C | ASTM D648 |
| Continuous Use Temperature | 105 | °C | UL 746B |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Limiting Pressure Velocity - @ 100 fpm | 6000 | psi·fpm |
| Note Message | |
|---|---|
| 1 . | @2000 PV |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vistalon™ 7602 | ExxonMobil Chemical | EPDM | Vistalon™ |
| 4MID® 9B22115 | 4Plas | Nylon 6 | 4MID® |
| NYCOA Polyamide 2610 | Nycoa (Nylon Corporation of America) | Nylon 612 | NYCOA Polyamide |
| Asaflex™ 810 | AKelastomers | SBS | Asaflex™ |
| HIPOL™ J903 | Mitsui Chemicals, Inc. | PP Homopolymer | HIPOL™ |
