Order Products : sales@su-jiao.com
Retpol® 7839/4 HS UV2
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | PolyPacific Pty. Ltd. |
| Trademark: | Retpol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HXt7wR_Retpol-7839-4-HS-UV2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Seblex 7839/4 HS UV2 is a calcium carbonate filled thermoplastic styrenic rubber modified polypropylene compound which has been oil extended. It is a high flow injection moulding grade. It is also quite shear thinning and has good mould filling capability. It has been developed for flexibility and low surface hardness to give it "soft-feel" characteristics and stabilized for automotive heat ageing and weathering requirements. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.968 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 2.00 mm | 75 | ||
| Shore A, 5 sec, 2.00 mm | 73 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412 | ||
| 100% Strain, 2.00 mm | 3.30 | MPa | |
| 300% Strain, 2.00 mm | 4.70 | MPa | |
| Tensile Strength 2(Break, 2.00 mm) | 6.70 | MPa | ASTM D412 |
| Tensile Elongation 3(Break, 2.00 mm) | 580 | % | ASTM D412 |
| Tear Strength 4(2.00 mm) | 33.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Suggested Max Regrind | 10 | % | |
| Processing (Melt) Temp | 190 to 230 | °C | |
| Mold Temperature | 15.0 to 50.0 | °C | |
| Injection Rate | Fast |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| 4 . | Die C, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 7842-80 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Bergamid™ A70 G20 UF colored | PolyOne Corporation | Nylon 66 | Bergamid™ |
| HIVOREX 5200B | Lotte Chemical Corporation | HDPE | HIVOREX |
| LNP™ THERMOCOMP™ LC008E compound | SABIC Innovative Plastics | PEEK | LNP™ THERMOCOMP™ |
| Sylvin 9600-80 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
