Order Products : sales@su-jiao.com

Addisil™ 160 E

Category:	Rubber , Rubber
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Addisil™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	HXCYQH_Addisil-160-E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Addisil 1X0 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications. Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odourless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacturing.

Message

The Addisil 1X0 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.

Key Features and Benefits

High transparency, no yellowing

Excellent mechanical properties

Dry, non-stick surface

Odourless during processing and in its application

Fast curing

One-component, ready to use

Shelf life of 3 months from date of manufacturing.

General Information
Features	Fast Cure Food Contact Acceptable Heat Cure High Clarity Low to No Odor Non-Stick
Uses	Medical/Healthcare Applications Profiles Tubing
Agency Ratings	BfR Food Contact, Unspecified Rating FDA 21 CFR 177.2600 ISO 10993 USP Class VI
Appearance	Clear/Transparent
Processing Method	Extrusion Profile Extrusion

Physical	Nominal Value	Unit	Test Method
Density	1.18	g/cm³	DIN 53479

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	60		DIN 53505

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	11.0	MPa	DIN 53504
Tensile Elongation (Break)	630	%	DIN 53504
Tear Strength ¹	42.0	kN/m	ASTM D624
Compression Set (175°C, 22 hr)	15	%	DIN 53517

Thermoset	Nominal Value	Unit
Shelf Life	13	wk
Post Cure Time (200°C)	4.0	hr

Additional Information	Nominal Value	Unit
Vulcanization (175°C)	10.0	min

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
TECHNYL® 1021ST BRIGHT	Solvay Engineering Plastics	Nylon 6	TECHNYL®
Sumikon® PM-9640 (Compression)	Sumitomo Bakelite North America, Inc.	Phenolic	Sumikon®
Sylvin 6209-75 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
TOTAL Polyethylene Lumicene® M 6012 EP	TOTAL Refining & Chemicals	HDPE	TOTAL Polyethylene
ICORENE® N4435	ICO Polymers EMEA, A Division of A. Schulman	PP Homopolymer	ICORENE®