Order Products : sales@su-jiao.com
REVOLVE® N-132
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Matrix Polymers |
| Trademark: | REVOLVE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HWntgy_REVOLVE-N-132.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Revolve N-132 is a rotational moulding low density octene polyethylene grade which has been designed to provide excellent toughness and ESCR without compromising impact strength and mouldability. The grade is UV8 stabilised. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 6.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | > 1000 | hr | |
| 100% Igepal | > 1000 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 8.25 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 250 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ARM Impact (-40°C, 3.00 mm) | 95.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 45.0 | °C | ISO 75-2/B |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PULSE™ 2000 EZ | Trinseo | PC+ABS | PULSE™ |
| Bergadur™ BR3300-8022 RS BK001 | PolyOne Corporation | PBT | Bergadur™ |
| ADPOLY EM-530 | Lotte Chemical Corporation | LLDPE | ADPOLY |
| Ebalta MG 804 GF / MG 804-1 | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| Garathane™ X 96-322-A NAT | AlphaGary | PVC Alloy | Garathane™ |
